Cambium Networks C009045A001A PMP 450i 900Mhz Connectorized Access Point N-Type

Product Features:
• Deeper frequency propagation for Cambium Networks PMP 450 platform
• Provides a reliable link for near and non-line-of-site (NLOS) deployments
• 100Mbps subscriber capacity in a 20 MHz channel
• Access point is now 802.3at compatible and includes an AUX port, while the Subscriber can re-use the 30 VDC power supplies common to the PMP 100 platform.

Product Specifications:
• Frequency: 902 – 928MHz
• Channel Spacing: Configure on 0.5MHz increments
• Channel Width: 5, 7, 10, or 20MHz
• Physical Layer: 2×2 MiMO OFDM
• Ethernet Interface: 100/1000BaseT, full duplex, rate auto negotiated, 802.3 compliant (SM is 10/100BaseT only)
• Protocols: IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
• Network Management: HTTP, HTTPS, Telnet, FTP, SNMP v3
• VLAN: 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
• Subscriber per Sector: up to 238
• Max Range: 120mi (190km)
• Latency: 3-5ms
• Antenna Connection: 50ohm, N-Type
• Transmit Power Range: 22dB dynamic range (to EIRP limit by region) (1dB step)
• Maximum Transmit Power: 25dBm
• Surge Supression: EN61000-4-5: 1.2us/50us, 500 V voltage waveform
• Operating Temperature: -40 to 140deg F (-40 to 60deg C)
• Power Consumption: 18W typical, 20W max (up to 50W with AUX port in use)
• Input Voltage: 48-56 V DC, 802.3at compliant
• Encryption: 56-bit DES, FIPS-197 128-bit AES